Order Products : sales@su-jiao.com
MARPOL® LL4M 820-G
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oRy4cw_MARPOLLL4M820G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MARPOL® LL4M 820-G is a LLDPE resin designed for blending and good processability. Forms: Granules |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 14.5 | MPa | ASTM D638 |
| Fracture | 7.45 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 57 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 430 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 530 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LRS911M | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| NEXT SIGNATURE PA6 MG-100 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| Infino HP-1000XA | SAMSUNG SDI CO., LTD. | PC+ABS | Infino |
| OmniLon™ PA6/6 MS2 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| Dynalloy™ GP 7820-30N | PolyOne Corporation | TPE | Dynalloy™ |
