Order Products : sales@su-jiao.com

Osterlene® LLM1018A

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	oPgQzi_OsterleneLLM1018A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

LLM1018 is best suited for applications requiring excellent clarity, gloss, toughness and heat seal. Typical blown film applications include; seal layer in coextrustions, heavy duty packaging and clarity packaging.

Osterlene LLM1018 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

General Information
Additive	Processing aid Anti-caking agent (5000 ppm)
Features	Highlight Anti-caking property Definition, high Good toughness
Uses	Packaging
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Co-extrusion molding

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Puncture Energy	6.28	J	ASTM D3763
Film Puncture Force	77.0	N	ASTM D3763
secant modulus			ASTM D882
1% secant, MD	179	MPa	ASTM D882
1% secant, TD	208	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	12.8	MPa	ASTM D882
TD : Yield	10.0	MPa	ASTM D882
MD : Fracture	74.5	MPa	ASTM D882
TD : Fracture	56.5	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	500	%	ASTM D882
TD : Fracture	600	%	ASTM D882
Elmendorf Tear Strength			ASTM D1922
MD	220	g	ASTM D1922
TD	430	g	ASTM D1922

Additional Information	Nominal Value	Unit	Test Method
Sealing Initial Temperature	102	°C	ASTM F88

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SSZ6066	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
WPP PP PPHFGC-2	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
NILENE® P15 K40C	Taro Plast S.p.A.	PP Homopolymer	NILENE®
Fenochem C 3500	Chemiplastica, Inc.	Phenolic	Fenochem
Dynalloy™ GP 7810-60T	PolyOne Corporation	TPE	Dynalloy™