Order Products : sales@su-jiao.com
Fireguard® 910L16-C13-NL
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Fireguard® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oIeAGC_Fireguard-910L16-C13-NL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Fireguard®910L16-C13-NL is a flexible polyvinyl chloride material,. This product is available in Europe and is processed by extrusion. Fireguard®The main features of 910L16-C13-NL are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw C | 91 | ASTM D2240 | |
| Shaw C, 10 seconds | 86 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 15.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 200 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 75.0 | °C | ASTM D794 |
| Brittleness Temperature | -9.00 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 4.51 | ASTM D150 | |
| 1 MHz | 3.74 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.056 | ASTM D150 | |
| 1 MHz | 0.039 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 51 | % | ASTM D2863 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (177°C, 1000 sec^-1) | 473 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| Av.Sp. 消光面积：95平方米/千克平均燃烧热：10.19 兆焦/千克平均放热速率：50 千瓦/平方米动态热稳定性， 205°C，100 rpm，72 gms：20Kayeness ACR，370°F，1000 秒-1：424 帕-秒峰值放热速率：69 千瓦/平方米峰值烟雾量：0.62 1/mTA六位说明编号116-452总放热率：63 兆焦/平方米 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PTFE 62 X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| T-Blend® 6594B-G88E | TSRC Corporation | SEBS | T-Blend® |
| HiFill® POM CO GF5 CC | Techmer Engineered Solutions | Acetal (POM) Copolymer | HiFill® |
| Luflexen hyPE 35 P FA | LyondellBasell Industries | MDPE | Luflexen |
| Sylvin 4200-80UV Orange 5120 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
