Order Products : sales@su-jiao.com
CERTENE™ HI-3052
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oHoEe0_CERTENE-HI-3052.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HI-3052 is a certified prime grade Hexene copolymer designed for INJECTION MOLDING General Purpose thin-wall applications requiring good balance of properties. HI-3052 features high flow, fast cycling, easy processability, good impact strength and dimensional stability. HI-3052 applications include multicavity thin-walled food containers, frozen food containers, seedling trays, aerosol over-caps and closures. HI-3052 recommended processing temperature is 210 to 230°C. with mold @ 20 to 40°C. HI-3052 complies with FDA regulation 21CFR 177.1520(c) 3.1a + 3.2a and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | < 10.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 23.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1000 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 73.0 | °C | ASTM D648 |
| Brittleness Temperature | < -50.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 230 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Hostacom 65F5-4 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| Braskem PP TI8300C | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
| Hylon® N1035STHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| MARPOL® HDM 507-UV | Marco Polo International, Inc. | HDPE | MARPOL® |
| POTICON KT16 | Otsuka Chemical Co., Ltd. | PEEK | POTICON |
