Order Products : sales@su-jiao.com
SABIC® STAMAX 30YK470 Provisional
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® STAMAX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oFKaoP_SABIC-STAMAX-30YK470-Provisional.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® STAMAX 30YK470 is a 30% long glass fiber reinforced grade with improved impact and flow properties. The grade is specially developed for extrusion compression moulding. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1B | ||
| 23°C, injection molding | 6200 | MPa | ISO 527-2/1B |
| 80°C, injection molding | 4400 | MPa | ISO 527-2/1B |
| 120°C, injection molding | 3600 | MPa | ISO 527-2/1B |
| Tensile Stress | ISO 527-2/1B | ||
| Yield, 23°C, injection molding | 98.0 | MPa | ISO 527-2/1B |
| Yield, 80°C, injection molding | 60.0 | MPa | ISO 527-2/1B |
| Yield, 120°C, injection molding | 43.0 | MPa | ISO 527-2/1B |
| Tensile Strain (Break, 23°C, Injection Molded) | 2.3 | % | ISO 527-2/1B |
| Flexural Modulus | ISO 178 | ||
| 23°C, injection molding | 5500 | MPa | ISO 178 |
| 80°C, injection molding | 3600 | MPa | ISO 178 |
| Flexural Stress | ISO 178 | ||
| 23°C, injection molding | 138 | MPa | ISO 178 |
| 80°C, injection molding | 70.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C, injection molding | 24 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 21 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C, injection molding | 70 | kJ/m² | ISO 179/1eU |
| 23°C, injection molding | 57 | kJ/m² | ISO 179/1eU |
| Falling Dart Impact - Total Energy (23°C) | 58.0 | J/cm | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 157 | °C | ISO 75-2/A |
| CLTE - Flow | ASTM D696 | ||
| -30 to 30°C | 5.4E-5 | cm/cm/°C | ASTM D696 |
| 23 to 80°C | 3.7E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP500V | LyondellBasell Industries | PP Homopolymer | Moplen |
| Nypol® PA A3 T20 PRTA011 NR389 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| INEOS PP H01H-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| Pearlthane® 12C75 | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Pearlthane® |
| Domamid HT™ 7750R35H3 | Technical Polymers, LLC | Nylon 66 | Domamid HT™ |
