Order Products : sales@su-jiao.com

PRIMATOP HDPE HMW 1000950

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Amco Polymers
Trademark:	PRIMATOP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	o9l127_PRIMATOP-HDPE-HMW-1000950.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

PRIMATOP HDPE HMW 1000950 is a High Density (HMW) Polyethylene material. It is available in North America for blow molding.

Important attributes of PRIMATOP HDPE HMW 1000950 are:

Copolymer

Food Contact Acceptable

High ESCR (Stress Crack Resistant)

Impact Resistant

Rigid

Typical applications include:

Engineering/Industrial Parts

Food Contact Applications

Tanks

General Information
Features	Copolymer Food Contact Acceptable Good Impact Resistance Good Melt Strength High ESCR (Stress Crack Resist.) Medium Rigidity
Uses	Agricultural Tanks Blow Molding Applications Thick-walled Parts
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	10	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
F50	> 600	hr	ASTM D1693A
F50	> 600	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	24.8	MPa	ASTM D638
Tensile Elongation ²(Break)	> 600	%	ASTM D638
Flexural Modulus	1170	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -90.6	°C	ASTM D746

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min

Resin Grade	Manufacturer	Category	Trademark
Viton® A	DuPont Performance Elastomers	Fluorelastomer	Viton®
ENVIRON® ENV39-NC430	ENVIROPLAS®, Inc.	PC+PBT	ENVIRON®
ISPLEN® PM 250 BX	REPSOL	PP Homopolymer	ISPLEN®
Optix® CA-42	Plaskolite, Inc.	Acrylic (PMMA)	Optix®
PENTAMID B S L H black	PENTAC Polymer GmbH	Nylon 6	PENTAMID B