Order Products : sales@su-jiao.com
Isocor™ CN30XT
| Category: | Nylon 610 , Polyamide 610 |
| Manufacturer: | Shakespeare Monofilaments and Specialty Polymers |
| Trademark: | Isocor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o946nm_Isocor-CN30XT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Isocor™ CN30XT is a low viscosity PA-610 based copolymer. This transparent nylon resin is specifically suited for applications requiring increased solvent resistance and UV stability. Isocor™ CN30XT is also used in applications requiring high modulus and low temperature impact properties. This resin can be processed using conventional techniques. Typical applications for CN30XT include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.30 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 0.28 | -- | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2300 | 2260 | MPa | ASTM D638 |
| Tensile Strength | 67.6 | 70.3 | MPa | ASTM D638 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 59 | 59 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Glass Transition Temperature | 72.8 | -- | °C | DSC |
| Injection | Dry | Unit | |
|---|---|---|---|
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Hopper Temperature | 60.0 | °C | |
| Rear Temperature | 210 to 221 | °C | |
| Middle Temperature | 216 to 227 | °C | |
| Front Temperature | 221 to 232 | °C | |
| Nozzle Temperature | 243 to 254 | °C | |
| Processing (Melt) Temp | 243 to 254 | °C | |
| Mold Temperature | 10.0 to 93.3 | °C | |
| Injection Pressure | 3.45 to 13.8 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AS30NT6001 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| APEX® 94-A0098A-70 | Teknor Apex Company | PVC, Flexible | APEX® |
| DURANEX® 7400F | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Dynacom 304-G15 | Dynachem Co. Ltd. | Nylon 66 | Dynacom |
| KOPA® KN333G15 | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
