Order Products : sales@su-jiao.com
ADMER™ AT1113A
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o7EUqb_ADMER-AT1113A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADMER™ AT1113A is a Polyethylene material. It is available in North America for blow molding. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 A 2015/512 GF15 IM UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Keysor PVC KC1201-005 | Keysor-Century Corporation | PVC, Unspecified | Keysor PVC |
| Ingeo™ 6201D | NatureWorks® LLC | PLA | Ingeo™ |
| Silastic® Q7-4535 | Dow Corning Corporation | Silicone | Silastic® |
| NEOFLON™ EP-610 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
