Order Products : sales@su-jiao.com
KRATON® G1701 M
| Category: | SEPS , Styrene Ethylene Propylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o68eEi_KRATON-G1701-M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below.
Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 1.0 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.0 to 0.2 | wt% | Internal Method |
| Polystyrene Content | 35 to 39 | % | Internal Method |
| Total Extractables | < 3.0 | % | Internal Method |
| Viscosity 2(100°C) | 15.0 to 19.0 | cSt | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Diblock Content | 100 | % | |
| Styrene/Rubber ratio | 37/63 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.07 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 100 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Kin,1.70%wt (ENJ404) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 7560 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| STYRON™ 485 | Trinseo | PS (HIPS) | STYRON™ |
| SureSpec HD50-10 | Genesis Polymers | HDPE, HMW | SureSpec |
| Network Polymers Polyester NPP 60-2008 PETG | Network Polymers, Inc. | PETG | Network Polymers Polyester |
| Elastron® G G501.A60.B.PS | Elastron USA, Inc. | SEBS | Elastron® G |
