Order Products : sales@su-jiao.com
Sumitomo Phenolic FM 21386
| Category: | Phenolic , Phenolic |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Phenolic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o2oZ6E_Sumitomo-Phenolic-FM-21386.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FM 21386 is a single stage phenolic molding compound reinforced with synthetic fiber in pellet form. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Apparent Density | 0.50 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (Compression Molded) | 1.2 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.15 | % | ASTM D570 |
| Water Absorption - 48 hr | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Compression Molded) | 41.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 5000 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 62.0 | MPa | ASTM D790 |
| Compressive Strength | 172 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 32 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 145 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 14 | kV/mm | |
| -- 3 | 11 | kV/mm | |
| Dielectric Constant 4(1 MHz) | 4.80 | ASTM D2520 | |
| Dissipation Factor 5(1 MHz) | 0.020 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Wet, 60 Hz |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vinnolit® VK 710 | Vinnolit GmbH & Co. KG | PVC Alloy | Vinnolit® |
| Anjacom® 55/80-GK10 | Almaak International GmbH | PC+ABS | Anjacom® |
| KRATON® D1101 J | Kraton Polymers LLC | SBC | KRATON® |
| PENTAMID B L10 H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| Dryflex® SE 60A201 | ELASTO | TPE | Dryflex® |
