Order Products : sales@su-jiao.com
CERTENE™ LLI-5026
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o2kvFO_CERTENE-LLI-5026.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLI-5026 is a certified prime copolymer designed for High-Flow INJECTION MOLDING of thin-walled, high quality applications. LLI-5026 features easy processability over a wide range of molding conditions, fast cycle times, good rigidity, high gloss surface, low temperature toughness and warpage free moldings. LLI-5026 applications include housewares, margarine tubs, containers, trash cans, toys, lids, closures and caps. Suggested processing temperature is 170 to 210°C, with the mold at 20 to 40°C. LLI-5026 complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, Compression Molded, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 90 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 440 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -65.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| All test specimens were compression molded according to ASTM D1928 procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 - 210 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2285 A | RTP Company | PEK | RTP |
| Geon™ Vinyl Rigid Extrusion LR620 white 1046 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| INELEC PPACF20 | Infinity LTL Engineered Compounds | PPA | INELEC |
| Kuraray Poval® PVA 205 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| LNP™ LUBRICOMP™ DFL32XXP compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
