Order Products : sales@su-jiao.com
Arnitel® ID 2045
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Arnitel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o1al4o_ArnitelID2045.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Arnitel®ID 2045 is a thermoplastic elastomer (TPE) material,. This product is available in North America, Europe or Asia Pacific region. The processing method is: 3d printing, fused filament fabrication (fff). Arnitel®The main features of ID 2045 are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.040 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 3 sec) | 34 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(3D Printed) | 29.0 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| 3D Printed 2 | 8.00 | MPa | ISO 527-2 |
| 3D Printed 3 | 7.60 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Fracture, 3D Printed 4 | 350 | % | ISO 527-2 |
| Fracture, 3D Printed 5 | 390 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -35.0 | °C | ISO 11357-2 |
| Vicat Softening Temperature | 90.0 | °C | ISO 306/A50 |
| Melting Temperature 6 | 158 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Additional Information |
|---|
| The mechanical data is tested on printed tensile bars, printed in two directions: 0°-90° and 45°-45° |
| Note Message | |
|---|---|
| 1 . | 45°-45° |
| 2 . | 0°-90° |
| 3 . | 45°-45° |
| 4 . | 0°-90° |
| 5 . | 45°-45° |
| 6 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2740 S-50A | RTP Company | SEBS | RTP |
| SAMAT 5003S1 | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | SAMAT |
| TOTAL Polyethylene Lumicene® M 6012 EP | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Nipol® DN401L | Zeon Chemicals L.P. | NBR | Nipol® |
| Asaprene™ T-413 | AKelastomers | SBS | Asaprene™ |
