Order Products : sales@su-jiao.com
Indothene HD 46GP009
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene HD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o1RIxZ_Indothene-HD-46GP009.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-HD 46GP009 is a natural grade of HDPE, produced by Hostalen Stirred Tank Heavy Diluent (STHD) Slurry process at IPCL's Gandhar Complex. It possesses bimodal molecular weight distribution, which improves processability and mechanical properties. This grade meets the MFI and Density requirements of material as per IS:4984:1995 on "High Density Polyethylene pipe for water supply-specification". When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS:4984:1995, will meet the requirements of the designation PE-EW-A45-T012 mentioned in the clause 5.2 of IS:4984:1995. The pipe made from this grade meets the hydrostatic strength requirement of PE-63 class of pipe as per IS:4984:1995. The grade has excellent ESCR properties and is suitable for pesticide bottles upto 1 ltr. capacity. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The grade complies with FDA regulation: CFR title 21, 177.1520, Olefin polymer. The level of antioxidant in 46GP009 is not more than 0.3% by mass of the resin. The antioxidant used in the grade are covered in IS:10141. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.946 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 23 | g/10 min | ASTM D1238 |
| 190°C/5.0 kg | 0.90 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, injection molding, F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 11 | % | ASTM D638 |
| Fracture, 3.20mm, injection molding | 350 | % | ASTM D638 |
| Additional Information |
|---|
| OIT, ISO 4427/ISO 10837, Al pan, 200°C: >20 minTensile Elongation at Break, ASTM D 638, Type IV, 3.2 mm: >350% |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Die Temperature | 218 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1 |
| 2 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RASCHIG EN 5004/5007 | RASCHIG GmbH | Epoxy | RASCHIG |
| REVOLVE® N-266 | Matrix Polymers | Plastomer | REVOLVE® |
| Cheng Yu T883GV2 | Cheng Yu Plastic Company Limited | PBT | Cheng Yu |
| Eastar™ EN067, Natural | Eastman Chemical Company | Copolyester | Eastar™ |
| Osterlene® PPH-2.6-BOPP | Osterman & Company | PP Homopolymer | Osterlene® |
