Order Products : sales@su-jiao.com
POLYCOMPO PE SP2040
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nzOCmD_POLYCOMPO-PE-SP2040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE SP2040 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific. Typical application: Film. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.8 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 55 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 220 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 101 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 116 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® 3027U(7) | Samyang Corporation | PC | TRIREX® |
| Xuchuan XCW-8100HT | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ACCUGUARD™ CP1467V2CSL | ACLO Compounders Inc. | PP Copolymer | ACCUGUARD™ |
| DURACON® M25-45 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| CALIBRE™ 301V-15 | Sumika Styron Polycarbonate Limited | PC | CALIBRE™ |
