Order Products : sales@su-jiao.com
SureSpec IP-120
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nxVidE_SureSpec-IP-120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IP-120 is a Medium-Impact injection molded certified prime resin specially designed for applications requiring good impact resistance at low temperatures. IP-120 features very good dimensional stability and processability, excellent heat risstance, medium-high flow for fast mold filling and optimal balance of mechanical properties. Recommended processing temperature is between 210° - 220°C. IP-120 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and with most international regulations concerning the use of Polypropylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1020 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNISOFT ADHESION™ AD-90A-NT-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| Unilex™ UP 8004 | United Polychem | PP Homopolymer | Unilex™ |
| Dynaprene® VE1080A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
| EPO-TEK® 301-2FL | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Petlon Prime A2-G15-00-BK | Petlon Polymers Ltd | Nylon 66 | Petlon Prime |
