Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M5730
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nxMPRV_Geon-Vinyl-Rigid-Molding-M5730.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™ Vinyl Rigid Molding M5730 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Rigid Molding M5730 include construction applications and outdoor applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Spiral Flow | 88.9 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 79 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2340 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 42.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 71.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18 mm, Injection Molded | 53 | J/m | |
| 0°C, 3.18 mm, Injection Molded | 270 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 430 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 73.9 | °C | |
| 0.45 MPa, Annealed, 6.35 mm | 77.8 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 72.2 | °C | |
| 1.8 MPa, Annealed, 6.35 mm | 76.1 | °C | |
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI Str | 50.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm, ALL | V-0 | ||
| 1.91 mm, ALL | 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULATEC® PEEK WR 30 MV 14 | A. Schulman Europe | PEEK | SCHULATEC® |
| ASTAMID™ KB3EG5 | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| ESPRENE EPDM 606F | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
| Kumho STE 2172GN | Korea Kumho Petrochemical Co., Ltd. | Rubber | Kumho STE |
| Braskem PP TI6120AN | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
