Order Products : sales@su-jiao.com
PRIMALENE WPP694M
| Category: | mLLDPE , Metallocene Linear Low Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nwFcgv_PRIMALENE-WPP694M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A metallocene linear low density polyethylene Applications:
Features:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | 0.70 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 432 | MPa | |
| 1% Secant, TD | 585 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 17.9 | MPa | |
| TD : Yield | 22.2 | MPa | |
| MD : Break | 53.0 | MPa | |
| TD : Break | 45.9 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 590 | % | |
| TD : Break | 700 | % | |
| Dart Drop Impact | 80 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 35 | g | |
| TD | 300 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 123 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec LD20-002 | Genesis Polymers | LDPE | SureSpec |
| Viton® A-700 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| VINIKA® CB55EB | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Flexible | VINIKA® |
| Cereplast Compostables® 6000 | Cereplast, Inc. | PLA | Cereplast Compostables® |
| EMLON® 66 GFR 20 | EMAS Plastik San.Tic.AS. | Nylon 66 | EMLON® |
