Prime ABS Weather-X 401

Category:	ABS+Acrylic , Acrylonitrile Butadiene Styrene + Acrylic (PMMA)
Manufacturer:	Primex Plastics Corporation
Trademark:	Prime ABS Weather-X
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ns0fdz_Prime-ABS-Weather-X-401.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Prime Weather-X 401 is a thin gauge extruded acrylic (PMMA) protective cap film that can be laminated to plastic substrates, such as ABS, HIPS, and PMMA. Its exceptional UV protection extends the indoor and outdoor durability of the base sheet. Extruded acrylic film also protects the substrate from yellowing and fading. Its consistent high gloss outshines the finish of brown acrylic films. This tough film also provides abrasion resistance, mildew and fungus resistance, as well as, protection from chemical spillage. Applications: Some applications for this product include components for RV's, travel trailers & mobile homes, bath & shower enclosures, sinks, spas, dashboards & consoles for construction & farm equipment, housing for marine craft & snowmobiles, and appliance parts. Processing: Prime Weather-X 401 will process the same as ABS, depending on the grade that is used for the substrate. It is suggested that slightly cooler oven temperatures on the side of the film be utilized. Finishing: Parts made from Prime Weather-X 401 may be joined With machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws is an economical means of securing the joints. Formed parts may be bonded with Methylene Chloride if maximum impact strength is not required. Press and snap techniques as well as sonic welding are other methods of bonding this product. Please contact your Primex Plastics representative for more information on finishing, fabricating or the thermoforming process. Colors, Textures and Capabilities: Colors are readily available in white, off-white, brown and black. Specific color matches are available upon request. Prime eather-X 401 is available in thicknesses of .060-.400 in. and widths up to 72".

Message

Prime Weather-X 401 is a thin gauge extruded acrylic (PMMA) protective cap film that can be laminated to plastic substrates, such as ABS, HIPS, and PMMA. Its exceptional UV protection extends the indoor and outdoor durability of the base sheet. Extruded acrylic film also protects the substrate from yellowing and fading. Its consistent high gloss outshines the finish of brown acrylic films. This tough film also provides abrasion resistance, mildew and fungus resistance, as well as, protection from chemical spillage.

Applications:
Some applications for this product include components for RV's, travel trailers & mobile homes, bath & shower enclosures, sinks, spas, dashboards & consoles for construction & farm equipment, housing for marine craft & snowmobiles, and appliance parts.

Processing:
Prime Weather-X 401 will process the same as ABS, depending on the grade that is used for the substrate. It is suggested that slightly cooler oven temperatures on the side of the film be utilized.

Finishing:
Parts made from Prime Weather-X 401 may be joined With machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws is an economical means of securing the joints. Formed parts may be bonded with Methylene Chloride if maximum impact strength is not required. Press and snap techniques as well as sonic welding are other methods of bonding this product.

Please contact your Primex Plastics representative for more information on finishing, fabricating or the thermoforming process.

Colors, Textures and Capabilities:
Colors are readily available in white, off-white, brown and black. Specific color matches are available upon request. Prime eather-X 401 is available in thicknesses of .060-.400 in. and widths up to 72".

General Information
Features	Fungus Resistant Good Abrasion Resistance Good UV Resistance Good Weather Resistance High Gloss High Heat Resistance High Impact Resistance High Tensile Strength
Uses	Appliance Components Automotive Instrument Panel Bathroom Accessories Building Materials Construction Applications Marine Applications
Appearance	Black Brown Colors Available Off-White White
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.04	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)	0.80	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	44.9	MPa	ASTM D638
Flexural Modulus	1760	MPa	ASTM D790
Flexural Strength	61.3	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	80.0	°C	ASTM D648

Optical	Nominal Value		Test Method
Gardner Gloss (60°)	95		ASTM D523

Additional Information	Nominal Value		Test Method
Weatherability	F2 for UV Exp.		UL 746C

Resin Grade	Manufacturer	Category	Trademark
SKYBOND® 2595	Industrial Summit Technology Co.	API	SKYBOND®
Nipol® NBR N30L	Zeon Corporation	NBR	Nipol® NBR
Armlen® PP NE 30.1	Poly Plastic	PP, Unspecified	Armlen®
Geon™ Vinyl Flexible B5D00	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
Sylvin 3270-75 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin