Order Products : sales@su-jiao.com
Dryflex® 51712 SE
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nrBeF1_Dryflex51712SE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 51712 SE: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 60 Shore A Service Temperature Range: -50 to +125°C (unstressed material) Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 2781 |
| Molding Shrinkage | 0.75 - 2.0 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.00 | MPa | ISO 37 |
| Tensile Stress (Yield) | 7.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 600 | % | ISO 37 |
| Tear Strength 1 | 30 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature 2 | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 4 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | C method: crescent sample |
| 2 . | unstressed material |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TORZEN® G3500HSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Badamid® PA612 CF30 | Bada AG | Nylon 612 | Badamid® |
| Plexar® PX2246 | LyondellBasell Industries | HDPE | Plexar® |
| POLYCASA® ACRYL G 88 E | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
| POLYfill PP CIP6015F | Polykemi AB | PP, Unspecified | POLYfill |
