Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M4910 (USP CLASS VI for TRANS 9494 only)
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | npux27_Geon-Vinyl-Rigid-Molding-M4910-USP-CLASS-VI-for-TRANS-9494-only-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™ Vinyl Rigid Molding M4910 (USP CLASS VI for TRANS 9494 only) is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Medical/Healthcare. Primary characteristic: radiation (gamma) resistant. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Spiral Flow | 73.7 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2910 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 54.5 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 19 | % | ASTM D638 |
| Flexural Modulus | 2830 | MPa | ASTM D790 |
| Flexural Strength | 85.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 0°C, 3.18 mm, Injection Molded | 53 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 80 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 67.8 | °C | |
| 0.45 MPa, Annealed, 6.35 mm | 65.0 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 61.1 | °C | |
| 1.8 MPa, Annealed, 6.35 mm | 62.2 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 204 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3559 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Nanjing Hongrui PC CT1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PC | Nanjing Hongrui PC |
| Ducor® DE1040U | Ducor Petrochemicals BV | PP Homopolymer | Ducor® |
| Epoxies, Ect. 10-3012 | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| Karina BLACK PVC COMPOUD -E CAK 85-48/ 1-F | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
