Order Products : sales@su-jiao.com
Unigel PS U8875
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Unigel Plásticos |
| Trademark: | Unigel PS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nodnxg_Unigel-PS-U8875.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Water Absorption (Equilibrium) | 0.070 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1350 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 60 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.50 mm) | 95 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.30 mm) | 89.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 1 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP TIVAR® H.O.T. | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| Tecomid® NB40 GR15 NL XA70 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| VALOX™ DR48 - CS1049 resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Epoxies, Ect. 50-3185 NC (Catalyst #140) | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| LEXAN™ HFD1930 resin | SABIC Innovative Plastics | PC | LEXAN™ |
