Order Products : sales@su-jiao.com
STYRON™ 438
| Category: | PS (HIPS) , High Impact Polystyrene Resin |
| Manufacturer: | Trinseo |
| Trademark: | STYRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nkmzdD_STYRON-438.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STYRON™ 438 is a high-impact polystyrene resin with good flow, excellent stiffness, high heat and impact resistance. It is designed for injection molding applications. Main Characteristics:
Complies with:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 33.1 | MPa | |
| Ultimate, Injection Molded | 30.3 | MPa | |
| Tensile Elongation (Break, Injection Molded) | 40 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2560 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 58.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 77.2 | °C | |
| 1.8 MPa, Annealed | 98.9 | °C | |
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.50 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Talcoprene® 540TC NAT | SO.F.TER. SPA | PP Homopolymer | Talcoprene® |
| Adell PP EF-12 | Adell Plastics, Inc. | PP, Unspecified | Adell PP |
| Evatane® 28-03 | Arkema | EVA | Evatane® |
| Kumho SAN SAN 330I | Korea Kumho Petrochemical Co., Ltd. | SAN | Kumho SAN |
| POLYfill PPH GF10020 PD2 | Polykemi AB | PP Homopolymer | POLYfill |
