Order Products : sales@su-jiao.com
Braskem PE PB-682
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nkGCuK_Braskem-PE-PB-682.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: PB682 is a low density polyethylene (LDPE), produced under high pressure technology. The end products molded with this resin present good dimensional stability and high flexibility. Applications: Injection blow molding and Medium mechanical strength film Process: Blow molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.9 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 12.0 | MPa | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Andur 2-92 AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Andur AL 62 DP/Curene® 110 | Anderson Development Company | PUR-Eth,aliphat | Andur |
| Di-Pak™ R-4545/7 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| ENVIROPLAS® ENV12-NC220 | ENVIROPLAS®, Inc. | PC | ENVIROPLAS® |
| CP PRYME® Nylon 66 NN213HSL BK/OM200 | Chase Plastics Services Inc. | Nylon 66 | CP PRYME® Nylon 66 |
