Order Products : sales@su-jiao.com
Fluoroplex X 50 - GML
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | UNIFLON |
| Trademark: | Fluoroplex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nigSlW_Fluoroplex-X-50---GML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoroplex X 50-GML is a polytetrafluoroethylene (PTFE) product, which contains 50% stainless steel powder filler. It can be processed by sintering or injection molding and is available in North America or Latin America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 3.30 - 3.40 | g/cm³ | Internal method |
| Contractility- Sintering | 1.1 - 2.1 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Sintering Temperature - Maximum | 365 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 - 73 | Internal method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 21.0 | MPa | Internal method |
| Tensile Elongation (Break) | 160 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Code: 010004101 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 21.0 - 25.0 | °C | |
| Injection Pressure | 49.0 - 58.8 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Andur 9002 APTF | Anderson Development Company | PUR-TDI | Andur |
| Flontech® FT-1-BLU2-FM-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| GAPEX® RPP30DA13NA | Ferro Corporation | PP Homopolymer | GAPEX® |
| Grilamid® L 25 nat 6112 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Polifil® PP HM-40 | The Plastics Group | PP, Unspecified | Polifil® PP |
