Order Products : sales@su-jiao.com
POLYCOMPO PE 2540R
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nhMPuP_POLYCOMPO-PE-2540R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 2540R is a Linear Low Density Polyethylene product. It can be processed by rotational molding and is available in Asia Pacific. Applications of POLYCOMPO PE 2540R include industrial applications and plumbing/piping/potable water. Primary characteristic: rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.4 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 57 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 11.0 | MPa | |
| Break, Injection Molded | 16.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 470 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 101 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 121 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tekulac ST 18 | TEKUMA Kunststoff GmbH | ABS | Tekulac |
| APEX® 85-J501P-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| ASTALON™ H3000 | Marplex Australia Pty. Ltd. | PC | ASTALON™ |
| Magnobond 3106 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Durethan® B 30 S F30 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
