Order Products : sales@su-jiao.com
KRATON® FG1924 G
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ndhvGL_KRATON-FG1924-G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton FG1924 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied from North America in the physical form identified below.
Kraton FG1924 G is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient informulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 40 | g/10 min | ASTM D1238 |
| Solution Viscosity | 19000 | mPa·s | Internal Method |
| Maleic Anhydride Content | Internal Method | ||
| Bound | 0.7 to 1.3 | wt% | |
| Free | < 0.3 | wt% | |
| Water Content | < 500 | ppm | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dust | Internal Method | ||
| GO, Acumist B-6 | 0.10 to 0.40 | % | |
| GT, Supreme Talc | 0.10 to 0.30 | % | |
| Styrene/Rubber ratio | 13/87 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 10 sec) | 49 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 23.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 750 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYLOY® MG-0034N-V0 | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| DOMAMID® 6FC | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Magnobond 2004 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Mablex 464 | Ravago Group | PC+ABS | Mablex |
| POLYFORT® FPP 1607 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
