Order Products : sales@su-jiao.com
RELENE® M60200
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nbL9r2_RELENE-M60200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M60200 is a High Density Polyethylene (HDPE) grade designed for injection moulding applications. M60200 is suitable for moulding of houseware and commodities. Due to narrow molecular weight distribution of resin, articles exhibit excellent gloss. The resin also imparts good rigidity, stiffness, impact resistance coupled with good melt flow properties required for mould filling of large articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PA66 HF200 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 66 | Sunny® |
| CALIBRE™ 3503 | Trinseo | PC | CALIBRE™ |
| Generic PUR-Ether/MDI | Generic | PUR-Ether/MDI | Generic |
| HAIPLEN EP10 G4 BA | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| Laprene® 8K1000A70 | SO.F.TER. SPA | SEBS | Laprene® |
