Order Products : sales@su-jiao.com
Matrixx 55S5202
| Category: | PC , Polycarbonate |
| Manufacturer: | The Matrixx Group, Inc. |
| Trademark: | Matrixx |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | na0bbV_Matrixx-55S5202.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Matrixx 55S5202 is a polycarbonate (PC) material, which contains a 20% glass fiber reinforced material. This product is available in North America,. The main features of Matrixx 55S5202 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 - 0.30 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 96.5 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 5170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 149 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 143 | °C | ASTM D648 |
| RTI | 93.3 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | 5VA | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Rear Temperature | 282 - 310 | °C | |
| Middle Temperature | 282 - 310 | °C | |
| Front Temperature | 282 - 310 | °C | |
| Processing (Melt) Temp | 293 - 321 | °C | |
| Mold Temperature | 71.1 - 104 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| -20°F Dewpoint |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 804 TFE 13 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| Selvol™ 125 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Thermylene® P6-20FG-2153 | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| En Chuan 332 | En Chuan Chemical Industries Co,. Ltd. | PS (GPPS) | En Chuan |
| Hifax TKC 243P C1V301 | LyondellBasell Industries | PP Copolymer | Hifax |
