Order Products : sales@su-jiao.com

Hapcast™ 3732

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Hapco Inc.
Trademark:	Hapcast™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nXREGp_Hapcast-3732.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Our best aluminum filled, all-purpose tooling compound.
A unique polymer alloy system, with the following new features:

Short-term exposure to 400°F, and continuous service at 325°F is possible with this system.

Provides excellent heat transfer properties

Easily mixed and poured at room temperature

Can be drilled, tapped, sanded, ground, polished, and turned into lathe.

Applications:

Molds

Dies

Duplicate & Master Models

Foundry Patterns

Fixtures

General Information
Filler / Reinforcement	Aluminum
Features	Fast Molding Cycle High Heat Resistance Low Viscosity Machinable
Uses	Molds/Dies/Tools
Appearance	Aluminum
Forms	Liquid
Processing Method	Casting

Physical	Nominal Value	Unit
Specific Gravity	1.65	g/cm³
Molding Shrinkage - Flow	0.075 to 0.15	%

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	88

Mechanical	Nominal Value	Unit
Compressive Strength	128	MPa

Thermal	Nominal Value	Unit
Continuous Use Temperature	163	°C
Service Temperature - Intermitent	204	°C

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	6500	cP

Resin Grade	Manufacturer	Category	Trademark
POLYMAN® FABS 20 GF	A. Schulman Europe	ABS	POLYMAN®
RTP 4408 L	RTP Company	Nylon, Unspecified	RTP
Taitacell EPS 351F	Taita Chemical Company, Ltd.	PS (EPS)	Taitacell
Nanjing Hongrui PA6 B201	Nanjing Hongrui Engineering Plastics Co., Ltd.	Nylon 6	Nanjing Hongrui PA6
Glastic® 1580	Glastic Corporation	Polyester, TS	Glastic®