Order Products : sales@su-jiao.com
Adell PC DR-10
| Category: | PC , Polycarbonate |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nWqdav_Adell-PC-DR-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PC DR-10 is a Polycarbonate (PC) material. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.25 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 130 | % | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 96.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 800 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 138 | °C | |
| 1.8 MPa, Unannealed | 132 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA6 73G15L-NC010 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| SLOVALEN® PH 96 FRD 1 | Plastcom | PP, Unspecified | SLOVALEN® |
| Staramide BT6 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| Fainplast PVC PH 70/AT | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| PLUSTEK RA320G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
