Order Products : sales@su-jiao.com
VisiJet® M3 Techplast
| Category: | Unspecified , Unspecified |
| Manufacturer: | 3D Systems |
| Trademark: | VisiJet® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nVpGAf_VisiJet-M3-Techplast.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VisiJet Techplast Plastic Material (gray color) provides an economical solution for general models. In addition, this material is commonly used for sacrificial patterns for numerous direct casting applications. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.02 | g/cm³ | ASTM D4164 |
| Ash Content | 0.010 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 866 | MPa | ASTM D638 |
| Tensile Strength | 22.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.1 | % | ASTM D638 |
| Flexural Strength | 28.1 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 46.0 | °C | ASTM D648 |
| Additional Information |
|---|
| ProJet Compatability: SD, HD |
| Note Message | |
|---|---|
| 1 . | Liquid @ 80 °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REVOLVE® M-716 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| ALCOM® PC 740/4 GY1177-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| AKROMID® B3 GF 40 RM-M black (3534) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Aristech Altair® I-300 | Aristech Acrylics LLC | Acrylic, Unspecified | Aristech |
| HiFill® PA4/6 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
