Order Products : sales@su-jiao.com
Rulon® J
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Saint Gobain Performance Plastics |
| Trademark: | Rulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nT7wso_Rulon-J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating. Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.95 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 13.8 | MPa | ASTM D1708 |
| Tensile Elongation (Break) | 180 | % | ASTM D1708 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA30 NL RM | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Paracril® BPLT | INSA | NBR | Paracril® |
| Plasmer 5050D-1/3839 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| POLYCOMPO PE 102 | POLYCOMPO Co.,Ltd. | LDPE | POLYCOMPO PE |
| NHU-PPS 1H30C | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
