Order Products : sales@su-jiao.com
Braskem PP HP 523J
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nLYRlY_Braskem-PP-HP-523J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HP 523J is a low fluidity homopolymer with good processability. The product is suitable for metallisable film, both as monolayer and coextruded structures. It does not contain any slip or anti-blocking agents and it is Calcium Stearate free. Applications: BOPP films for flexible packaging. Metallized films. Processing: Bioriented Film (BOPP) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 33.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 30 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ CS747 | Asahi Kasei Chemicals Corporation | AS | Stylac™ |
| Ferro PP TPP20AC12BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| GAPEX® RPP10EU60AL | Ferro Corporation | PP, Unspecified | GAPEX® |
| ELASTOSIL® LR 3843/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| HIVOREX 8100GX | Lotte Chemical Corporation | HDPE | HIVOREX |
