Order Products : sales@su-jiao.com
P-FLEX 010
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Putsch Kunststoffe GmbH |
| Trademark: | P-FLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nLVTOs_P-FLEX-010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Standard type with a constant light natural color. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.75 - 0.85 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 44.0 | MPa | ISO 527-2 |
| Fracture | 42.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 20 | % | ISO 527-2 |
| Flexural Modulus | 2500 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 84.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -20°C | 12 | kJ/m² | ISO 180 |
| 23°C | 16 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 97.0 | °C | ISO 306/B |
| Additional Information |
|---|
| Tensile Strength, ISO 527: 44 MPa |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 240 - 260 | °C | |
| Mold Temperature | 30.0 - 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP Proteus® Black | Quadrant Engineering Plastic Products | PP Homopolymer | Quadrant EPP |
| Ultra Purge LOW-E | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| ASTAMID™ MB3S | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| FRAGOM XLC/900 OR | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| PLUSTEK PA803 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
