Order Products : sales@su-jiao.com
Sevrene® 3500-85A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nIZFTd_Sevrene-3500-85A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sevrene® 3500-85A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion or injection molding. Typical application of Sevrene® 3500-85A: Automotive |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 87 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 5.80 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 10.7 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 510 | % | ISO 37 |
| Tear Strength 4 | 49 | kN/m | ISO 34-1 |
| Compression Set 5(70°C, 22 hr) | 48 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 6(80°C, 1000 hr) | 8.0 | % | ISO 188 |
| Change in Tensile Strain at Break in Air 7(80°C, 1000 hr) | 16 | % | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 8 | -47.0 | °C | ISO 974 |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Fogging | |||
| 38°C 9 | 96 | % | |
| 85°C 10 | 96 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Color Stability | |||
| -- 11 | No surface defects | ||
| -- 12 | 0.830 | ||
| Xenon Weatherometer | |||
| -- 13 | No surface defects | ||
| -- 14 | 1.79 |
| Note Message | |
|---|---|
| 1 . | Type 1, 500 mm/min |
| 2 . | Type 1, 500 mm/min |
| 3 . | Type 1, 500 mm/min |
| 4 . | Method Ba, Angle (Unnicked), 500 mm/min |
| 5 . | Type A |
| 6 . | No objectionable color Change or tackiness |
| 7 . | No objectionable color Change or tackiness |
| 8 . | Type B |
| 9 . | GM9305P, hrs |
| 10 . | GM9305P, 6 hrs |
| 11 . | to Light, Xenon Arc, SAE J1885, 1240 kJ/m2, Surface Defects, Delta E |
| 12 . | to Light, Xenon Arc, SAE J1885, 1240 kJ/m2, Change in Color, Delta E |
| 13 . | Xenon Arc, SAE J1960-89, 2500 kJ/m2, Surface defects |
| 14 . | Exterior, Xenon Arc, SAE J1960-89, 2500 kJ/m2, Change in Color, Delta E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2800 B-75A | RTP Company | TPO (POE) | RTP |
| Next Nylon 66 Prime Series PST-01BK | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| Akulon® S223-DH | DSM Engineering Plastics | Nylon 66 | Akulon® |
| ALCOM® PC 740/4 UV WT1445-06LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| CALIBRE™ 301V-10 | Trinseo | PC | CALIBRE™ |
