Order Products : sales@su-jiao.com

Qenos PE GM7655

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nGLxSG_Qenos-PE-GM7655.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
GM7655 is a high molecular weight extrusion blow moulding grade of High Density Polyethylene with extremely good ESCR. GM7655 is used for the production of small to medium blown containers and for the production of sheet and thermoformed containers. Suitability for use in any application should be determined by appropriate performance testing. GM7655 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Message

GM7655 is a high molecular weight extrusion blow moulding grade of High Density Polyethylene with extremely good ESCR.

GM7655 is used for the production of small to medium blown containers and for the production of sheet and thermoformed containers. Suitability for use in any application should be determined by appropriate performance testing.

GM7655 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General Information
Features	Food Contact Acceptable High ESCR (Stress Crack Resist.) High Molecular Weight
Uses	Containers Sheet Thermoformed Containers
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1
Forms	Pellets
Processing Method	Extrusion Blow Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.949	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.20	g/10 min
190°C/5.0 kg	0.60	g/10 min
Environmental Stress-Cracking Resistance	2000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	28.0	MPa	ASTM D638
Flexural Modulus	1000	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	290	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LXR510E	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
Baoding 68T90	Baoding Bangtai Polymeric New-Materials Co.,Ltd	TPU-Polyester	Baoding
ExxonMobil™ LLDPE LL 1002YB Cast	ExxonMobil Chemical	LLDPE	ExxonMobil™ LLDPE
Ferro PP LPP40BK69HB-BK	Ferro Corporation	PP, Unspecified	Ferro PP
Sylvin 8200-85 Brown 7424	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin