Order Products : sales@su-jiao.com
Kingfa GFPP-10
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nFuKkW_Kingfa-GFPP-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kingfa GFPP-10 is a polypropylene material, which contains a 10% glass fiber reinforced material. This product is available in North America or Asia Pacific,. The main features of Kingfa GFPP-10 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.60 - 1.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, Injection Molded) | 55.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus 3(23°C, Injection Molded) | 2500 | MPa | ASTM D790 |
| Flexural Strength 4(23°C, Injection Molded) | 70.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 6.40mm, injection molding | 150 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.40mm, injection molding | 135 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Additional Information |
|---|
| Filler Content, ISO3451/1, Method A: 10% |
| Note Message | |
|---|---|
| 1 . | 10 mm/min |
| 2 . | 10 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® M24300 | Reliance Industries Limited | LLDPE | RELENE® |
| Quadrant EPP Semitron® ESd 480 | Quadrant Engineering Plastic Products | PEEK | Quadrant EPP |
| XYRON™ VT31V | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| Optix® CA-1000 I FDA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
| Sylvin 9940-70 UV Yellow 4117 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
