Order Products : sales@su-jiao.com
Nycast Elastalon
| Category: | Nylon 6 Elast , Polyamide 6 Elastomer |
| Manufacturer: | Cast Nylons Ltd. |
| Trademark: | Nycast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nFfnsb_Nycast-Elastalon.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nycast Elastalon is a Polyamide 6 Elastomer (Nylon 6 Elast) material. It is available in North America for casting. Primary attribute of Nycast Elastalon: Impact Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 2.8 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 74 | ASTM D785 | |
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 752 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 26.9 | MPa | |
| Break | 44.7 | MPa | |
| Tensile Elongation (Yield) | 300 | % | ASTM D638 |
| Flexural Modulus | 724 | MPa | ASTM D790 |
| Compressive Modulus | 1220 | MPa | ASTM D695 |
| Compressive Strength | 31.0 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 1100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 190 | °C | |
| 1.8 MPa, Unannealed | 63.9 | °C | |
| Continuous Use Temperature | 98.9 | °C | ASTM D794 |
| Melting Temperature | 221 | °C |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 60.0 | ||
| 1 MHz | 5.00 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.75 | ||
| 1 MHz | 0.16 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXAMID™ 236Q33 | SAX Polymers | Nylon 66 | SAXAMID™ |
| TRIBOFORCE® PEEK C2300 | LEIS Polytechnik - polymere Werkstoffe GmbH | PEEK | TRIBOFORCE® |
| Addisil™ 470 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| Hanwha Total PP BJ820T | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| Sylvin 9077-75C NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
