Order Products : sales@su-jiao.com
Taizhou Phenolic PF2C3-431J
| Category: | Phenolic , Phenolic |
| Manufacturer: | Taizhou Changxiong Plastic Co., Ltd. |
| Trademark: | Taizhou Phenolic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nFVmmZ_Taizhou-Phenolic-PF2C3-431J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Taizhou Phenolic PF2C3-431J is a phenolic (Phenolic) material,. This product is available in the Asia-Pacific region and is processed by injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | < 1.70 | g/cm³ | Internal method |
| Molding Shrinkage | 0.60 - 0.90 | % | ISO 2577 |
| Water Absorption | mg | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | > 80.0 | MPa | Internal method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 1.8 | kJ/m² | Internal method |
| Charpy Unnotched Impact Strength | > 5.0 | kJ/m² | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | > 190 | °C | Internal method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | Internal method |
| Volume Resistivity | > 1.0E+13 | ohms·cm | Internal method |
| Dielectric Strength | > 10 | kV/mm | Internal method |
| Dissipation Factor | < 0.10 | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 70.0 - 80.0 | °C | |
| Front Temperature | 90.0 - 100 | °C | |
| Mold Temperature | 165 - 180 | °C | |
| Injection Pressure | 80.0 - 160 | MPa | |
| Back Pressure | 1.00 - 3.00 | MPa |
| Injection instructions |
|---|
| Cure Time: 10 to 20 s/mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend® UT5207 | Covestro - Polycarbonates | PC+PBT | Makroblend® |
| Megalon® PA-6/12 HSL | Mega Polymers | Nylon 6/12 | Megalon® |
| Sinvicomp SIM5029R | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| ADEKA AM series | Adeka Corporation | PUR-Ether | ADEKA |
| EverGlide® SG3208T | Polymer Dynamix | PEEK | EverGlide® |
