Order Products : sales@su-jiao.com

ISPLEN® PB 180 A4M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nDguFL_ISPLEN-PB-180-A4M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 180 A4M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important. ISPLEN® PB 180 A4M is formulated with a specific additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing, reduces internal stresses and makes it easier to extract the pieces from the mould. TYPICAL APPLICATIONS The specific characteristics of ISPLEN® PB 180 A4M are particularly suitable for applications requiring excellent processability and good aesthetic appearance: Domestic and leisure furniture. Thin-walled boxes and round storage containers for exhibiting food products or consumer goods. Industrial components: toys, sports, household appliances, storage organizers... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 180 A4M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important.

ISPLEN® PB 180 A4M is formulated with a specific additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing, reduces internal stresses and makes it easier to extract the pieces from the mould.

TYPICAL APPLICATIONS
The specific characteristics of ISPLEN® PB 180 A4M are particularly suitable for applications requiring excellent processability and good aesthetic appearance:

Domestic and leisure furniture.

Thin-walled boxes and round storage containers for exhibiting food products or consumer goods.

Industrial components: toys, sports, household appliances, storage organizers...

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Antistatic
Features	Antistatic Food Contact Acceptable Good Dimensional Stability Good Flow Good Impact Resistance Good Processability Good Stiffness High Flow Low Warpage
Uses	Appliance Components Food Packaging Furniture Industrial Applications Sporting Goods Thin-walled Containers Thin-walled Parts Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1250	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	6.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	88.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 4799 X 115376 C	RTP Company	PTT	RTP
TOTAL Polypropylene PPC 4720XWZ	TOTAL Refining & Chemicals	PP Impact Copolymer	TOTAL Polypropylene
ALCUDIA® LDPE 2212FA	REPSOL	LDPE	ALCUDIA® LDPE
Braskem PP HP 523J	Braskem	PP Homopolymer	Braskem PP
Hostacom D1124 0001	LyondellBasell Industries	PP Homopolymer	Hostacom