Order Products : sales@su-jiao.com
Seblex® 7850
| Category: | Rubber , Rubber |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Seblex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nAHsiF_Seblex-7850.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Seblex 7850 is an oil extended, calcium carbonate filled, thermoplastic styrenic rubber compound. It is an injection moulding grade developed for flexibility and low surface hardness to give it "soft-feel" characteristics. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 2.00 mm | 65 | ||
| Shore A, 5 sec, 2.00 mm | 61 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain, 2.00 mm | 1.60 | MPa | |
| 300% Strain, 2.00 mm | 2.50 | MPa | |
| Tensile Strength 2(Break, 2.00 mm) | 5.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break, 2.00 mm) | 640 | % | ASTM D412 |
| Tear Strength 4(2.00 mm) | 19.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 15.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Die C, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowiol® 15-79 | Kuraray Co., Ltd. | PVOH | Mowiol® |
| ULTEM™ AUT210 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Ultramid® SEG8 BK-126 | BASF Corporation | Nylon 6 | Ultramid® |
| Fluoroplex MB 555 - GML | UNIFLON | PTFE | Fluoroplex |
| Durethan® AKV 35 HR H2.0 901510 | LANXESS Corporation | Nylon 66 | Durethan® |
