Order Products : sales@su-jiao.com
SureSpec HP-200
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n8hK6A_SureSpec-HP-200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HP-200 is a Polypropylene certified prime resin designed for injection molding of thin-walled lightweight articles. HP-200 combines good balance of good tensile strength with medium-high flow processability high stiffness, short cycling, good LTHS and excellent ESCR. HP-200 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. HP-200 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 36.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 8.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 106 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 240 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 154 HI UV | RTP Company | PP Copolymer | RTP |
| RTP 107 CC | RTP Company | PP, Unspecified | RTP |
| Varcum 29217 | Durez Corporation | Phenolic | Varcum |
| Andur 850 AP | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| DynaMix™ 3204-HF | Polymer Dynamix | PEEK | DynaMix™ |
