Order Products : sales@su-jiao.com
Petro Rabigh PE M8060
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Rabigh Refining & Petrochemical Co. |
| Trademark: | Petro Rabigh PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | n7CmrB_Petro-Rabigh-PE-M8060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M8060 is a high density polyethylene resin intended for injection molding. This resin has good flow characteristics that make it easier to process. Injection molding parts made from this resin exhibits high modulus and low warpage. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 5.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 29.0 | MPa | |
| Break | 16.0 | MPa | |
| Flexural Modulus | 1430 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 3.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Titalon® 1504AN | Titan Plastics Compounds Co., Ltd. | Nylon 6 | Titalon® |
| ALAMID® 6.6 GF 30 MOD WL SCHWARZ-9665 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | ALAMID® |
| ANSABLEND A15 000 0000 T65 V0 | Daloga srl | PC+ABS | ANSABLEND |
| ELASTOSIL® R plus 4001/40 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| ICORENE® 9042 | ICO Polymers APAC, A Division of A. Schulman | LMDPE | ICORENE® |
