Order Products : sales@su-jiao.com

Fluon® PTFE CD126E

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Asahi Glass Co., Ltd.
Trademark:	Fluon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	n3bGIP_Fluon-PTFE-CD126E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA. The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid. The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects. Applications: Stretch films Flat cables Characteristics: Low RR

Message

The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.

The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.

Applications:

Stretch films

Flat cables

Characteristics:

Low RR

General Information
Features	Copolymer Good Stretchability
Uses	Electrical/Electronic Applications Film Wire & Cable Applications
Forms	Powder

Physical	Nominal Value	Unit
Specific Gravity	2.18	g/cm³
Apparent Density	0.46	g/cm³

Additional Information	Nominal Value	Unit	Test Method
Extrusion Pressure ¹	2.30		Internal Method
Median Particle Size	500.0	µm
Reduction Ratio	15.0 to 300

Note Message
1 .	20° die angle, 16% ISOPAR H, and RR=1000

Resin Grade	Manufacturer	Category	Trademark
POLYLON T 015 UV - transparent	POLYMA Kunststoff GmbH & Co. KG	PC	POLYLON
SUMIPEX® MG5	Sumitomo Chemical Co., Ltd.	Acrylic (PMMA)	SUMIPEX®
Sylvin 8937-85 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
LEXAN™ PK2870 resin	SABIC Innovative Plastics	PC	LEXAN™
Sylvin 7833-60 Red 6205	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin