| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mzUVfD_Osterlene-LD-3-931.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
LD-3-931 is a series of homopolymer resins specifically designed for overwrap packaging. LD-3-931 provides excellent optical properties and good stiffness for improved machineability. LD-3-931 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.931 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 262 | MPa | ASTM D882 |
| Tensile Strength - MD (Break) | 21.4 | MPa | ASTM D882 |
| Tensile Elongation - MD (Yield) | 450 | % | ASTM D882 |
| Dart Drop Impact 1 | 80 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 77 | ASTM D2457 | |
| Haze | 4.4 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ 205 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Ferro PP TPP40AJ37BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| Hostaform® C 13031 XAP | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| WELLAMID Nylon 6600-PA66-GV 20 HWV0CP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Luranyl® KR 2403 G4 TW 26343 | ROMIRA GmbH | PPE+PS | Luranyl® |