Order Products : sales@su-jiao.com
Marlex® HHM 5502LD
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mvAWfO_Marlex-HHM-5502LD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® HHM 5502LD is a High Density Polyethylene material. It is available in Latin America or North America for blow molding or injection blow molding. Important attributes of Marlex® HHM 5502LD are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | 35.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 600 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 1370 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® IR 2200L | Zeon Corporation | IR | Nipol® IR |
| Europrene® SOL T 177 | Versalis S.p.A. | SBS | Europrene® |
| Kemcor MD 6550 | Qenos Pty Ltd | LMDPE | Kemcor |
| Huafon JF-A-5030 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| KumhoSunny ABS HAG7220 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
