Order Products : sales@su-jiao.com
Marlex® EHM 6004
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mucLNd_Marlex-EHM-6004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® EHM 6004 is a High Density Polyethylene material. It is available in Latin America or North America for blow molding. Important attributes of Marlex® EHM 6004 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.963 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.37 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 15.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime 3150 | Prime PVC® | PVC, Rigid | Prime |
| TEREZ PA 6 6500 A | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| VENYL UN001 - 6733 | AD majoris | Nylon 66 | VENYL |
| VITAMIDE® BF30WT6405 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Kumho ASA XC190BM | Korea Kumho Petrochemical Co., Ltd. | ASA | Kumho ASA |
