Order Products : sales@su-jiao.com
UBESTA 3020X8
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mu38VS_UBESTA-3020X8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBESTA 3020X8 is a polyamide 12 (nylon 12) material,. This product is available in North America,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 41.0 | MPa | ASTM D638 |
| Fracture, 23°C | 54.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 250 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1400 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 54.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 54 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 145 | °C | ASTM D648 |
| Melting Temperature | 178 | °C |
| Additional Information |
|---|
| The value listed as Melting Point was tested in accordance with ASTM D3418.Tensile Strength at Break, ASTM D638, 23°C: >54 MPaTensile Elongation at Break, ASTM D638, 23°C: >250% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| INSULCAST® RTVS 3-95-2 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
| LNP™ STAT-KON™ DE002 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| LNP™ THERMOCOMP™ RF002XXH compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| Osterlene® HD-.04-948 | Osterman & Company | HDPE | Osterlene® |
| Durethan® DP AKV 50 HR H2.0 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
