Order Products : sales@su-jiao.com
Daelim Po1y® LA-25
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | DAELIM INDUSTRIAL CO., LTD. |
| Trademark: | Daelim Po1y® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mr37YZ_Daelim-Po1y-LA-25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daelim Po1y®LA-25 is a linear low density polyethylene product,. It is available in the Asia-Pacific region. Daelim Po1y®Application areas of LA-25 include wire and cable and food contact applications. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.911 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 19.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 900 | % | ASTM D638 |
| Flexural Modulus | 686 | MPa | ASTM D790 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 390 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -80.0 | °C | ASTM D746 |
| Additional Information |
|---|
| Elongation @ Break, ASTM D-638: >900%Brittleness Temperature, ASTM D-746: <-80°C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 210 | °C | |
| Cylinder Zone 5 Temp. | 210 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Grooved Barrel: 25-35°CScrew/Die/Head: 70-80°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STERalloy™ FDG 2791 | Hapco Inc. | TP, Unspecified | STERalloy™ FDG |
| Amodel® A-1133 HS | Solvay Specialty Polymers | PPA | Amodel® |
| CompaDur® 121 GF 20 LW natural (006) | DimeLika Plast GmbH | PBT | CompaDur® |
| DOMAMID® 6V0M1 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| DM® BSR-06® | Shanghai Disoxidation Enterprise Development Co., Ltd. | Biodeg Polymers | DM® |
