Category: | PBT , Polybutylene Terephthalate |
Manufacturer: | RTP Company |
Trademark: | RTP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | mpAVP1_RTP-1000-HI.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Base Resin - Impact Modified |
General Information | |
---|---|
Additive |
|
Features |
|
RoHS Compliance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.20 mm) | 1.5 - 2.6 | % | ASTM D955 |
Moisture Content | 0.030 | % |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 1720 | MPa | ASTM D638 |
Tensile Strength | 36.5 | MPa | ASTM D638 |
Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
Flexural Modulus | 1720 | MPa | ASTM D790 |
Flexural Strength | 57.2 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (3.20 mm) | 750 | J/m | ASTM D256 |
Unnotched Izod Impact (3.20 mm) | No Break | ASTM D4812 |
Flammability | Nominal Value | Test Method | |
---|---|---|---|
Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 121 | °C | |
Drying Time | 4.0 | hr | |
Dew Point | -28.9 | °C | |
Processing (Melt) Temp | 238 - 271 | °C | |
Mold Temperature | 79.4 - 107 | °C | |
Injection Pressure | 68.9 - 103 | MPa |
Injection instructions |
---|
Desiccant Type Dryer Required. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Santoprene™ 121-87 | ExxonMobil Chemical | TPV | Santoprene™ |
Sindustris ABS LXR510HJ | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
NuSil R32-2186 | NuSil Technology | Silicone | NuSil |
AEI SX-0610:CM601 | AEI Compounds Limited | XLPE | AEI |
Hifax CA387PC | LyondellBasell Industries | TPO (POE) | Hifax |